Product Description
- Content:100% Polyurethane
- Width:54 inches
- Roll Size:30 yards
- Railroaded:No
- Repeat:none
- Market:Contract Interiors, Hospitality, Healthcare, Office Seating, Marine, Automotive, RV
- Primary Application:Upholstery
- Abrasion:100,000 Double Rubs
- UV Resistance:500 Hours
- Cold Crack:-20°F
- Stain Resistance:Class 4.5
- California Tech. Bulletin 117 Section E
- BIFMA X5.7-1991 Class 1
- UFAC Class 1
- Federal Motor Vehicle Safety Standard (FMVSS) 302
- NFPA 260
- IMO A.652(16) 8.2 Smouldering Cigarette
- ASTM E84 Class 1
- California Technical Bulletin 133 is a composite test.
- This material can meet CAL133 when combined with the appropriate furniture components.
- Polyurethane upholstery vinyls are easy to clean. To prevent build-up of dirt and contaminants, which may cause permanent staining, periodic cleaning is highly suggested. The frequency of cleaning is dependent upon the environmental conditions to which the product is subjected.
Prompt cleaning is always recommended.
Ordinary dirt and stains can be removed with mild soap and water.
For more persistent stains use a 10% solution (1:10) of bleach.
NOTE: The use of commercial vinyl conditioners and protectants is NOT RECOMMENDED.
This material will resist, without serious discoloration, the repeated actions of normal dilutions of non-abrasive chlorine or ammonia-based cleaners.
NOTE: Be sure to rinse the cleaned area with clean water and dry with a lint free cloth.
The information in this cleaning guide refers to performance in specific tests conducted under laboratory conditions. This information is not a guarantee and does not relieve the user from the responsibility of the proper and safe use of the product and referenced cleaning agents.