Product Description
- Content:100% Vinyl
- Width:54 inches
- Roll Size:40 yards
- Finish:ResilienceSR
- Backing:100% Brushed Polyester Knit
- Railroaded:No
- Repeat:none
- Market:Contract Interiors, Hospitality, Healthcare, Office Seating, Education, Outdoor, Marine, Automotive, RV
- Primary Application:Upholstery
- Abrasion:500,000 Double Rubs
- Ultraviolet Resistance:1000 hours
- Cold Crack:-20°F
- AntiBacterial
- AntiMicrobial
- Mildew Resistant
- Bleach Resistant
- California Tech. Bulletin 117 Section E
- BIFMA Class 1
- Boston Fire Dept. BFD 1X-1
- Federal Motor Vehicle Safety Standard (FMVSS) 302
- ASTM E84 Class 1
- UFAC Class 1
- NFPA 260
- IMO A.652(16) 8.2 and 8.3
- California Technical Bulletin 133 is a composite test.
- This material can meet CAL133 when combined with the appropriate furniture components.
- Upholstery vinyls are easy to clean. To prevent build-up of dirt and contaminants, which may cause permanent staining, periodic cleaning is highly suggested. The frequency of cleaning is dependent upon the environmental conditions under which the product is subjected.Antiseptic surface treatment: Liberally apply diluted disinfectant using a sponge, rinse with cold water several times, then wipe dry. Dilution Rates: 6% Clorox® – 94% water, 6% Purex® – 94% water, 6% Javex® – 94% water, Fantastik®, Lysol® (uncolored solutions), Dettol Solution, or Formula 409®.Normal Office/Household Use: Most stains can be easily cleaned using warm, soapy water and clear water rinses. Moderate scrubbing with a medium bristle brush will help to loosen soiling materials from the depressions of embossed surfaces. For more stubborn stains, use commercially available mild detergents (Formula 409®, Fantastik®, Mr.Clean®) in accordance with the manufacturer’s instructions. Full strength rubbing alcohol or mineral spirits may be tried with caution if the listed cleaners do not work. Indiscriminate use of strong solvents can severely damage or discolor vinyl.